Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
- 12. Steering
   12.1. Introduction
   12.2. Technical characteristics
   12.3. Steering wheel
   12.4. Tips of steering draft
   12.5. Replacement of protective covers of steering transfer
   12.6. Steering transfer
   12.7. Pump of the amplifier of steering
   12.8. Removal of air from system of steering with the amplifier
+ 13. Body
+ 14. Electric equipment


2d841be8


12.7. Pump of the amplifier of steering

Removal

PERFORMANCE ORDER
1. Uncover a filling tank of hydraulic system of the amplifier of steering and, using the syringe, pump out liquid from a tank.
2. Unscrew two bolts and a nut (are specified by shooters) and remove a casing of a driving belt of the pump of the amplifier of steering.
3. Record a pulley of the pump of the amplifier of steering from a provorachivaniye.
4. Unscrew a nut of fastening of a pulley.
5. Take off a driving belt of the pump of the amplifier of steering and the generator.
6. Unscrew bolts of fastening of an arm of support of the pipeline of the amplifier of steering.
7. Disconnect pipelines of the amplifier of steering from the pump and a nutritious tank.
8. Unscrew three bolts and remove the pump of the amplifier of steering.
9. For removal of a tank from the pump of the amplifier of steering, fix the pump in a vice with soft sponges and unscrew two bolts which fix a tank to the pump.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence of the return to removal. Adjust a tension of a driving belt of the pump.
2. Fill in new liquid and remove air from hydraulic system of the amplifier of steering.