Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
13.1. Introduction
13.2. Care of a body
13.3 Care of an upholstery and rugs
13.4. Repair of insignificant damages of a body
13.5. Repair of strong damages of a body
13.6. Cowl
13.7. Replacement of the lock of a cowl
13.8. Replacement of a cable of the lock of a cowl
13.9. Front grille
13:10. Front bumper
13:11. Rear bumper
13:12. Forward wing
13:13. Door upholstery
13:14. Lock, cylinder of the lock and handle of opening of a door
13:15. Door glass
13:16. Window regulator
13:17. External mirror
13:18. Doors
13:19. Trunk lid
13:20. Luggage carrier lock
13:21. Cable of opening of the lock of a luggage carrier
13:22. Replacement of racks of support of a back door
13:23. Back door
13:24. Lock of a back door, external handle and cylinder of the lock
13:25. Casings of a steering column
13:26. Central console
13:27. Dashboard elements
13:28. Dashboard
13:29. Air inlet lattice
13:30. Front seats
+ 14. Electric equipment
|
Mudguard of protection of a forward wing on models from 1990 to 1994
Mudguard of a forward wing on models since 1995
Details of fastening of a forward wing on models from 1990 to 1994
Arrangement of connectors and brackets of fastening of a mudguard of a forward wing
Arrangement of percussion caps of fastening of a mudguard of a forward wing
Arrangement of elements of fastening of a forward part of a forward wing on models since 1995
Arrangement of bolts of fastening of the top part of a forward wing on models since 1995
Arrangement of a bolt of fastening of the top back corner of a forward wing on models since 1995
|
|
For access to a bolt it is necessary to open a forward door. |
Arrangement of a bolt of fastening of the lower back part of a forward wing
|
|
For access to a bolt it is necessary to open a forward door. |
Arrangement of bolts of fastening of the lower back part of a forward wing on models since 1995
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and record on supports. Remove a wheel. |
| 2. On models from 1990 to 1994 remove the repeater of turns, and on models since 1995 remove a headlight. |
| 3. From an arch of a forward wing remove the mudguard protecting a forward wing (see rice. An arrangement of percussion caps of fastening of a mudguard of a forward wing, the Mudguard of protection of a forward wing on models from 1990 to 1994, the Mudguard of a forward wing on models since 1995, the Arrangement of connectors and brackets of fastening of a mudguard of a forward wing). |
| 4. Remove an overlay of a front bumper. |
| 5. Unscrew bolts and nuts of fastening of a wing and remove a wing from the car (see rice. Details of fastening of a forward wing on models from 1990 to 1994, the Arrangement of elements of fastening of a forward part of a forward wing on models since 1995, the Arrangement of bolts of fastening of the top part of a forward wing on models since 1995, the Arrangement of a bolt of fastening of the top back corner of a forward wing on models since 1995, the Arrangement of a bolt of fastening of the lower back part of a forward wing, the Arrangement of bolts of fastening of the lower back part of a forward wing on models since 1995). |
| 6. Installation is made in the sequence, the return to removal. |
|
|
|
