Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. Cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. Front grille
   13:10. Front bumper
   13:11. Rear bumper
   13:12. Forward wing
   13:13. Door upholstery
   13:14. Lock, cylinder of the lock and handle of opening of a door
   13:15. Door glass
   13:16. Window regulator
   13:17. External mirror
   13:18. Doors
   13:19. Trunk lid
   13:20. Luggage carrier lock
   13:21. Cable of opening of the lock of a luggage carrier
   13:22. Replacement of racks of support of a back door
   13:23. Back door
   13:24. Lock of a back door, external handle and cylinder of the lock
   13:25. Casings of a steering column
   13:26. Central console
   13:27. Dashboard elements
   13:28. Dashboard
   13:29. Air inlet lattice
   13:30. Front seats
+ 14. Electric equipment

13:15. Door glass

GENERAL INFORMATION

Details of fastening of glass and window regulator of a forward door on models of 1990

1 – guide
2 – nut
3 – laying
4 – door glass
5 – washer
6 – back clamp of glass
7 – central clamp of glass

8 – forward clamp of glass
9 – external sealant
10 – stabilizer
11 – the back guide flew down
12 – the forward guide flew down
13 – window regulator
14 – window regulator handle

Details of fastening of glass and window regulator of a back door on model of 1990

1 – nut
2 – laying
3 – door glass
4 – washer
5 – back clamp of glass
6 – forward clamp of glass
7 – ram

8 – external sealant
9 – internal stabilizer
10 – external stabilizer
11 – the back guide flew down
12 – the forward guide flew down
13 – window regulator
14 – window regulator handle

PERFORMANCE ORDER

1. Remove an upholstery of a door and a protective film.
2. Lower door glass against the stop down.
3. On models since 1995 disconnect the electric socket from an external mirror and remove a decorative overlay of finishing of a mirror from a door.
4. Remove the internal handle of opening of a door and draft.
	5. Unscrew a bolt of fastening of the stabilizer (it is specified by an arrow) flew down and remove the stabilizer.
	6. Unscrew a bolt of fastening of a clamp of glass (it is specified by an arrow).
7. Extract glass from a door up.
8. Installation is made in the sequence, the return to removal.