Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
- 14. Electric equipment
   - 14.1. Body electric equipment
      14.1.1. Introduction
      14.1.2. Electric chains
      14.1.3. Detection of not closed chain
      14.1.4. Safety locks
      14.1.5. Chain breakers
      14.1.6. Relay
      14.1.7. Relay of turns and alarm light system
      14.1.8. Multipurpose switches of a steering column
      14.1.9. Ignition lock
      + 14.1.10. Replacement of switches of the dashboard
      14.1.11. Combination of devices
      14.1.12. Radio receiver
      14.1.13. Loudspeakers
      14.1.14. Antenna
      14.1.15. The antenna with the electric drive
      14.1.16. Replacement of bulbs of headlights
      14.1.17. Adjustment of light of headlights
      14.1.18. Headlight
      14.1.19. Replacement of bulbs of an incandescence
      14.1.20. Screen wiper engine
      14.1.21. Sound signal
      14.1.22. Check of a heater of back glass
      14.1.23. Window regulators with the electric drive
      14.1.24. Rear-view mirrors with the electric drive
      14.1.25. Safety airbag
   + 14.2. Electrical circuitries


2d841be8


14.1.23. Window regulators with the electric drive

GENERAL INFORMATION

Arrangement of contacts of the main switch of window regulators and condition of contacts on the switch socket at various provisions of the switch on models from 1990 to 1994


Arrangement of contacts of the door switch of window regulators and condition of contacts on the switch socket at various provisions of the switch on models from 1990 to 1994


Arrangement of contacts of the main switch of window regulators and condition of contacts on the switch socket at various provisions of the switch on models since 1995


Arrangement of contacts of the door switch of window regulators and condition of contacts on the switch socket at various provisions of the switch on models since 1995

Window regulators work with the electric drive only at inclusion of ignition.

Each window regulator has the separate reversive engine. Position of the switch of a window regulator defines polarity of tension given to the engine and sets the direction of rotation of the electric motor. Chain breakers are installed on parts of cars in a power-supply circuit of each engine of a window regulator.

PERFORMANCE ORDER
1. For check of operation of switches of window regulators remove the switch and, using an ohmmeter, check short circuit of contacts of the switch at various provisions of the switch (see rice. An arrangement of contacts of the main switch of window regulators and a condition of contacts on the switch socket at various provisions of the switch on models from 1990 to 1994, the Arrangement of contacts of the door switch of window regulators and a condition of contacts on the switch socket at various provisions of the switch on models from 1990 to 1994, the Arrangement of contacts of the main switch of window regulators and a condition of contacts on the switch socket at various provisions of the switch on models since 1995, the Arrangement of contacts of the door switch of window regulators and a condition of contacts on the switch socket at various provisions of the switch on models since 1995).
2. If switches of window regulators are serviceable, and the window regulator does not work, check giving of tension to the window regulator engine.
3. If tension arrives to the window regulator engine, and the window regulator does not work, disconnect door glass from a window regulator and, moving glass manually, check ease and smoothness of its movement.
4. If glass moves easily, replace the window regulator engine.