Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
- 14. Electric equipment
   - 14.1. Body electric equipment
      14.1.1. Introduction
      14.1.2. Electric chains
      14.1.3. Detection of not closed chain
      14.1.4. Safety locks
      14.1.5. Chain breakers
      14.1.6. Relay
      14.1.7. Relay of turns and alarm light system
      14.1.8. Multipurpose switches of a steering column
      14.1.9. Ignition lock
      + 14.1.10. Replacement of switches of the dashboard
      14.1.11. Combination of devices
      14.1.12. Radio receiver
      14.1.13. Loudspeakers
      14.1.14. Antenna
      14.1.15. The antenna with the electric drive
      14.1.16. Replacement of bulbs of headlights
      14.1.17. Adjustment of light of headlights
      14.1.18. Headlight
      14.1.19. Replacement of bulbs of an incandescence
      14.1.20. Screen wiper engine
      14.1.21. Sound signal
      14.1.22. Check of a heater of back glass
      14.1.23. Window regulators with the electric drive
      14.1.24. Rear-view mirrors with the electric drive
      14.1.25. Safety airbag
   + 14.2. Electrical circuitries


2d841be8


14.1.8. Multipurpose switches of a steering column

GENERAL INFORMATION

Arrangement of contacts on the socket of the multipurpose switch of light of headlights and turns


The switch of light of headlights and turns and condition of contacts on the socket at various provisions of the switch


Arrangement of contacts on the electric socket of the multipurpose switch of a screen wiper


Condition of contacts on the socket at various provisions of the multipurpose switch of a washer and screenwash

Check

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove the lower casing of a steering column.
3. For access to the electric socket of the multipurpose switch unscrew screws and remove a steel plate from the lower part of a steering column.
4. Disconnect electric sockets of multipurpose switches.
5. Using an ohmmeter, check resistance between contacts of the socket depending on position of the switch (see rice. An arrangement of contacts on the socket of the multipurpose switch of light of headlights and turns, the Switch of light of headlights and turns and a condition of contacts on the socket at various provisions of the switch, the Arrangement of contacts on the electric socket of the multipurpose switch of a screen wiper, the Condition of contacts on the socket at various provisions of the multipurpose switch of a washer and screenwash).

Replacement

PERFORMANCE ORDER
1. Remove a steering wheel.
2. Remove the top and lower casing of a steering column.
3. Remove a steel protective plate from the lower part of a steering column.
4. Disconnect electric sockets of switches.
5. Unscrew screws and remove the block of switches from a steering column.
6. Unscrew 4 screws and remove a sliding ring from the block of switches.
7. Unscrew screws and remove the switch of light of headlights and turns or the switch of a cleaner and washer of a windshield.
8. Installation is made in the sequence, the return to removal.