Subaru Legacy
- 1.1. Identification numbers
1.2. Governing bodies and control devices
- 1.3. Switches of lighting, turns, washer and glass cleaner
1.3.1. Switch of lighting, turns and brightness of lighting
1.3.2. Indexes of turns
1.3.3. Lighting brightness control
1.3.4. Switch of parking light
1.3.5. Switch of forward fog lights
1.3.6. Switch of back fog lamps
1.3.7. The proofreader of light of headlights with manual adjustment
1.3.8. Switch of a cleaner and washer of glasses
1.3.9. The switch of a cleaner and washer back flew down (Station wagon)
1.3.10. Screen wiper anti-icer
1.3.11. Heater of back glass
1.3.12. Washer of headlights
1.4. Catalytic converter
1.5. System of ventilation and air conditioning
1.6. System of climate control
1.7. System cruise control
1.8. Mechanical transmission
1.9. Automatic transmission
+ 1.10. Front seats
1.11. Arrangement and power of bulbs
+ 1.12. Safety locks and electric chains
1.13. Bases of safe operation of the car
1.14. Wheels and tires
1.15. Angles of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment
|
The switch of lighting, turns and brightness of lighting works only at inclusion of ignition.
Headlights
|
|
For inclusion of headlights, turn the handle on the end of the lever of the switch of turns. |
First situation
|
|
At installation of the handle the first situation, joins lighting of the dashboard, forward dimensional light, back lamps and illumination of registration plate. |
Second situation
|
|
At installation of the handle the second situation, joins headlights, lighting of the dashboard, back lamps and illumination of registration plate. |
Move the lever forward, at the same time driving beam is turned on. At inclusion of driving beam, on a combination of devices the control bulb lights up.
Light signal
|
|
Move the lever on yourself, at the same time passing beam is turned on.
If to pull the lever on itself against the stop, then the light signal joins. |
Move the lever in the direction of a steering wheel. The light signal can be included also at the included indexes of turn. At inclusion of a light signal, on a combination of devices the control bulb lights up.
|
|
