Subaru Legacy
since 1990-1998 release
Repair and operation of the car
Subaru Legacy
+
1.1. Identification numbers
+
2. Maintenance
+
3. Engines
+
4. Heating, ventilation
-
5. Fuel system
5.1. Introduction
5.2. Technical characteristics
5.3. Removal of pressure in fuel system
5.4. Check of the fuel pump
5.5. Fuel pump
5.6. Fuel separator (only models 4WD)
5.7. Fuel level sensor
5.8. Fuel tank
5.9. Casing of the air filter
5.10. Accelerator cable
5.11. Electronic system of injection of fuel
5.12. Fuel system
5.13. System of air supply
5.14. System of electronic control
5.15. Check of system of injection of fuel
+
5.16. Check and replacement of elements of system of injection of fuel
5.17. Turbocharger
5.18. Check of the executive mechanism of the gate of a turbocharger
5.19. General check of a turbocharger
5.20. Removal and installation of a turbocharger
+
6. Exhaust system
+
7. Systems of start, ignition
+
8. Transmissions
+
9. Coupling, shaft
+
10. Brake system
+
11. Suspension bracket
+
12. Steering
+
13. Body
+
14. Electric equipment
5.6. Fuel separator (only models 4WD)
GENERAL INFORMATION
Arrangement of a fuel separator on cars with a body "station wagon"
Arrangement of a fuel separator on cars with a body "sedan"
Removal and installation
PERFORMANCE ORDER
1.
Remove an upholstery of the luggage compartment opposite to a fuel-filling mouth.
2.
Disconnect ventilation hoses from a separator.
3.
Disconnect a fuel hose and remove a separator assembled.
4.
Installation is made in the sequence, the return to removal.
