Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Check of the accumulator
   7.4. Accumulator charging
   7.5. Accumulator
   + 7.6. System of ignition
   + 7.7. System of charging
   - 7.8. System of start of the engine
      7.8.1. Starter
      7.8.2. Replacement of the traction relay
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


2d841be8


7.8.1. Starter

Removal and installation

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Lift the car and record on supports.
3. Disconnect wires from contacts on the traction relay of a starter.
4. Unscrew top (it is specified by an arrow a photo at the left) and lower (it is specified by an arrow a photo on the right) bolts of fastening of a starter.
5. Remove a starter from the engine.
6. Installation is made in the sequence, the return to removal.