Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Check of the accumulator
   7.4. Accumulator charging
   7.5. Accumulator
   + 7.6. System of ignition
   + 7.7. System of charging
   - 7.8. System of start of the engine
      7.8.1. Starter
      7.8.2. Replacement of the traction relay
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment






7.8.2. Replacement of the traction relay

Removal and installation

PERFORMANCE ORDER
1. Unscrew a nut and disconnect a wire from contact of the traction relay.
2. Unscrew two bolts of fastening of the traction relay.
3. Remove the traction relay from a starter.
4. Installation is made in the sequence, the return to removal.





2d841be8 2d841be8