Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. Lever and cable of gear shifting
      8.2.5. Cable of the choice of transfers
      8.2.6. Switch of blocking of a starter and light of a backing
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of the transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and installation of the transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment






8.2.2. Technical characteristics

GENERAL INFORMATION

Tightening moments

Adjustment of a brake tape:
  – screw:
     • stage 1
8,0 Nanometer
     • stage 2
to unscrew on 3 turns
  – lock-nut
25 – 28 Nanometers
Nut of adjustment of shift
5 – 8 Nanometers
Bolts of fastening of the hydrotransformer
23 – 26 Nanometers
The transmission to the engine:
  – lower nuts
от 34 до 40 Nanometer
  – top bolt
от 34 до 40 Nanometer





2d841be8 2d841be8