Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
9.1. Technical characteristics
+ 9.2. Coupling
- 9.3. Driveshaft
9.3.1. Removal and installation of the driveshaft
9.3.2. Replacement of the central bearing of the driveshaft
9.3.3. Replacement of a sealing ring of the main transfer
+ 9.4. Power shafts
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. Lift the car and record on supports. |
| 2. Put with chalk or white paint tags of a relative positioning of different components for ensuring the correct subsequent installation. It is especially important to note an arrangement of a back part of the driveshaft in relation to a flange of the main transfer. |
|
|
3. Unscrew the bolts and nuts fixing a back part of the driveshaft to a flange of the main transfer. |
|
4. Unscrew bolts of fastening of an arm of the central bearing (are specified by shooters). |
| 5. Lower the driveshaft down and shift it back. At removal of the driveshaft the forward shlitsevy coupling will leave gearing with the conducted transmission shaft. |
|
Installation
| PERFORMANCE ORDER |
| 1. Before installation of the driveshaft grease vents on a forward part of the driveshaft with transmission liquid and, being careful not to damage a sealing ring, install the driveshaft in the transmission. |
| 2. Further installation is made in the sequence, the return to removal. |
|
|
|
