Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
   9.1. Technical characteristics
   + 9.2. Coupling
   - 9.3. Driveshaft
      9.3.1. Removal and installation of the driveshaft
      9.3.2. Replacement of the central bearing of the driveshaft
      9.3.3. Replacement of a sealing ring of the main transfer
   + 9.4. Power shafts
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


2d841be8


9.3.3. Replacement of a sealing ring of the main transfer

PERFORMANCE ORDER
1. Remove the driveshaft.
2. Using a dynamometer key, check torque which needs to be put to an entrance shaft of the main transfer for its provorachivaniye.
3. Record an entrance shaft of the main transfer from a provorachivaniye and unscrew a nut of fastening of an entrance shaft.
4. Using a stripper, remove an entrance shaft of the main transfer.
5. Take a sealing ring of the main transfer.
6. Using a tubular mandrel of the corresponding diameter, establish a new sealing ring of the main transfer.
7. Further installation is made in the sequence, the return to removal.