Subaru Legacy
since 1990-1998 release
Repair and operation of the car
Subaru Legacy
+
1.1. Identification numbers
+
2. Maintenance
+
3. Engines
+
4. Heating, ventilation
+
5. Fuel system
+
6. Exhaust system
+
7. Systems of start, ignition
+
8. Transmissions
+
9. Coupling, shaft
-
10. Brake system
10.1. Introduction
10.2. Technical characteristics
10.3. Replacement of brake shoes on disk brakes
10.4. Support of disk brakes
10.5. Brake disk
10.6. Replacement of brake shoes of drum brakes
10.7. Working brake cylinder
10.8. Main brake cylinder
10.9. Brake pipelines and hoses
10:10. Replacement of the regulator of pressure
10:11. Pumping of the hydraulic brake system
10:12. Adjustment of the emergency brake
10:13. Replacement of a cable of the emergency brake
10:14. Replacement of brake shoes of the emergency brake on back disk brakes
10:15. Additional brake system
10:16. Vacuum amplifier of brakes
10:17. Stoplight switch
10:18. Anti-blocking system of brakes (ABS)
+
11. Suspension bracket
+
12. Steering
+
13. Body
+
14. Electric equipment
10:10. Replacement of the regulator of pressure
PERFORMANCE ORDER
1.
Lift the car and record on supports.
2.
Using a cap key, unscrew four brake tubes from pressure regulator.
3.
Unscrew a bolt and remove pressure regulator.
4.
Installation is made in the sequence, the return to removal. Remove air from hydraulic system of brakes.
