Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
- 14. Electric equipment
   - 14.1. Body electric equipment
      14.1.1. Introduction
      14.1.2. Electric chains
      14.1.3. Detection of not closed chain
      14.1.4. Safety locks
      14.1.5. Chain breakers
      14.1.6. Relay
      14.1.7. Relay of turns and alarm light system
      14.1.8. Multipurpose switches of a steering column
      14.1.9. Ignition lock
      + 14.1.10. Replacement of switches of the dashboard
      14.1.11. Combination of devices
      14.1.12. Radio receiver
      14.1.13. Loudspeakers
      14.1.14. Antenna
      14.1.15. The antenna with the electric drive
      14.1.16. Replacement of bulbs of headlights
      14.1.17. Adjustment of light of headlights
      14.1.18. Headlight
      14.1.19. Replacement of bulbs of an incandescence
      14.1.20. Screen wiper engine
      14.1.21. Sound signal
      14.1.22. Check of a heater of back glass
      14.1.23. Window regulators with the electric drive
      14.1.24. Rear-view mirrors with the electric drive
      14.1.25. Safety airbag
   + 14.2. Electrical circuitries


2d841be8


14.1.7. Relay of turns and alarm light system

GENERAL INFORMATION

Arrangement of the relay of turns on models from 1990 to 1994

 

On models from 1990 to 1994 the relay of turns is located behind the dashboard to the left of a ware box.

Arrangement of the relay of turns on models since 1995

On models since 1995 the relay of turns is located behind the dashboard at the left.

Arrangement of screws of fastening of the left part of an arm of a ware box on models from 1990 to 1994


Arrangement of screws of fastening of an arm of the relay of turns on models from 1990 to 1994


Arrangement of the screw of fastening of the relay of turns on models since 1995


Removal

PERFORMANCE ORDER
Models from 1990 to 1994
1. Remove a ware box.
2. Then unscrew the screws fixing an arm of a ware box (see rice. An arrangement of screws of fastening of the left part of an arm of a ware box on models from 1990 to 1994, the Arrangement of screws of fastening of an arm of the relay of turns on models from 1990 to 1994).
3. Disconnect the electric socket from the relay of turns, then unscrew screws of fastening of an arm of the relay of turns and take the relay of turns together with an arm.
4. Remove the relay of turns from an arm.
Models since 1995
5. Remove the lower finishing of the dashboard from the driver and an arm of fastening of the lever of opening of a cowl.
6. Disconnect the electric socket from the relay of turns.
7. Unscrew the screw and take the relay of turns (see rice. An arrangement of the screw of fastening of the relay of turns on models since 1995).

Installation

Installation is made in the sequence, the return to removal.