Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru Legacy
- 1.1. Identification numbers
   1.2. Governing bodies and control devices
   + 1.3. Switches of lighting, turns, washer and glass cleaner
   1.4. Catalytic converter
   1.5. System of ventilation and air conditioning
   1.6. System of climate control
   1.7. System cruise control
   1.8. Mechanical transmission
   1.9. Automatic transmission
   + 1.10. Front seats
   1.11. Arrangement and power of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tires
   1.15. Angles of installation of wheels
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment

1.6. System of climate control

GENERAL INFORMATION

Prevention

Use an automatic control system of climate control only during the operation of the engine.

  1 -  switch of adjustment of temperature;
  2 - indicator;
  3 - AUTO switch;
  4 - OFF switch;
  5 - switch of external air temperature;

  6 - conditioner switch;
  7 - air stream switch;
  8 - fan speed switch;
  9 - air supply choice button;
  10 - having blown in a windshield;
11 – sensor

During the work of system in the AUTO mode if air temperature in salon decreases up to the required temperature, the compressor of the conditioner is automatically switched off. For effective dispersion of condensate from the internal surface of glasses in cold weather, include the A/C mode.

The Climate of Control system automatically operates the air temperature, fan speed, distribution of a stream of air, and the conditioner compressor. Temperature can be established with an accuracy of 0,5 °C within 18-32 °C.

AUTO mode switch

The Climate of Control system automatically operates air temperature in interior of the car in the AUTO mode. When pressing the AUTO button, the control lamp of AUTO lights up.

Manual installation of an operating mode

When the Climate of Control System works in the AUTO mode, pressing the buttons,
, or switch off manual installation of the mode, at the same time the control lamp of MANUAL lights up.
When buttons, or are pressed, the corresponding functions cope independently while automatic control of other functions is supported. To return system in the automatic mode, press the AUTO button.

OFF switch

The Climate of Control system is switched off by the OFF button (the compressor and the fan). When OFF is pressed, the external gate of an air vent will automatically be closed (the system of air supply will work in the air recirculation mode.

Switch of distribution of a stream of air

	ventilation	air supply through dashboard nozzles
	two levels	air supply through nozzles of the dashboard and in legs
	down	air supply in legs
	down and on a windshield	air supply through nozzles to a windshield and in legs

Switch of adjustment of temperature

1 – to press for increase in temperature

2 – switch of adjustment of temperature

3 – to press for reduction of temperature

Prevention

Installation within a year about 25 °C is recommended.

Installation of temperature remains even after switching off of ignition. However, if wires are disconnected from the accumulator, temperature will be established automatically on 25 °C.

Temperature is desirable the switch of regulation of temperature is installed by pressing: for a raising of temperature press the top end of the switch, and the low end of the switch, for reduction of temperature
One pressing of the switch changes temperature to 0,5 °C. Temperature can be established within 18–32 °C.

Switching of speed of the fan

The switch of speed of the fan has 5 provisions: position of AUTO and 4 various provisions of speed of the fan.
For the choice of desirable speed of the fan, consistently press the button. At the same time there is a consecutive increase, and then reduction of speed of the fan, up to the AUTO mode.

Choice of the mode of ventilation

The choice of the mode of ventilation happens when pressing the button

There is an air circulation in interior of the car, without intake of fresh air. This mode is used for bystry heating or cooling of air in interior of the car. Indication of the mode is determined by fire of a control lamp.
Supply of fresh external air in interior of the car. When the air conditioning system works in the AUTO mode, the mode of supply of fresh air automatically joins. Indication of the mode is determined by fire of a control lamp.

The switch of removal of condensate from a windshield

For effective dispersion of condensate from the internal surface of glasses in cold weather, include the mode, at the same time irrespective of an operating mode of the conditioner, the stream of air is directed to a windshield and side glasses, at the same time the control lamp lights up. After removal of condensate from a windshield, set an operating mode of the conditioner in the AUTO mode.