Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. Suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   - 11.3. The lobby is resistant
      11.3.1. Repair of a forward rack
      11.3.2. Forward stabilizer of cross stability
      11.3.3. Lower lever of a forward suspension bracket
      11.3.4. Replacement of the lower hinge of a forward suspension bracket
      11.3.5. Rotary fist
   + 11.4. Rack of a back suspension bracket
   11.5. The air self-leveled suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment






11.3.2. Forward stabilizer of cross stability

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and record on supports. Remove forward wheels.
2. Unscrew drafts of the stabilizer from the lower levers of a forward suspension bracket (nuts of fastening are specified by shooters).
3. Unscrew bolts of fastening of the clips fixing the stabilizer of cross stability.
4. Remove the stabilizer of cross stability.
5. Check the stabilizer for lack of wear and mechanical damages. Pay special attention to a condition of plugs of installation of the stabilizer.

Installation

Installation is made in the sequence, the return to removal.






2d841be8 2d841be8