Subaru Legacy

since 1990-1998 release

Repair and operation of the car

Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. Lever and cable of gear shifting
      8.2.5. Cable of the choice of transfers
      8.2.6. Switch of blocking of a starter and light of a backing
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of the transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and installation of the transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment


8.2.8. Check and replacement of support of the transmission


Support of the automatic transmission

1. Lift the car and record on supports.
2. Insert the lever between a forward beam and the transmission, and pressing the lever, try to move the transmission. If movement of the transmission considerable, it is necessary to check a state, and perhaps and to replace transmission support.
3. To replace a transmission support, unscrew the bolts fixing a support to a beam and the transmission.
4. A jack raise the transmission and remove transmission support.
5. Installation is made in the sequence, the return to removal.