The starter is not able to turn the engine:
– the accumulator is discharged or faulty;
– accumulator poles are weakened;
– connections of a starter are weakened;
– the traction relay of a starter is faulty;
– starter brushes are worn out or get stuck;
– the traction relay is faulty;
– short circuit in starter windings;
– starter details are faulty.
The starter turns the engine very slowly:
– the accumulator is discharged;
– connections of a starter are weakened;
– starter brushes are worn out or get stuck.
Extraneous noise during the work of a starter:
– the gear wheel of the drive or эубья a gear wreath of a flywheel is strongly worn-out;
– bolts of fastening of a starter are weakened.
The accumulator is not recharged:
– fall of plates of the accumulator;
– low level of electrolyte in the accumulator;
– the driving belt of the generator is not tense;
– the generator or the regulator of tension is faulty.
The control lamp of accumulator charging burns:
– the generator or the regulator of tension is faulty;
– break of a driving belt of the generator.
The control lamp of accumulator charging does not burn:
– the control lamp fused;
– break in a lamp chain;
– the generator or the regulator of tension is faulty.
Indications of devices increase with increase in turns of the engine:
– tension regulator is faulty.
The index of fuel or temperature do not give evidences:
– break of an electric chain;
– the sensor is faulty.
The index of fuel or temperature show the maximum value:
– short circuit of an electric chain;
– the sensor is faulty.
Bulbs do not burn:
– the glow lamp fused;
– the safety lock fused;
– the switch is faulty;
– break of an electric chain.
The electric motor does not work:
– the collector is polluted or burned;
– the anchor is faulty;
– jamming or wear of brushes;
– shaft bearings are jammed;
– the winding is faulty;
– the safety lock fused. |
